Solid state NMR characterization of formation of poly(ϵ‐caprolactone)/maghnite nanocomposites by in situ polymerization

Results of multinuclear MAS NMR spectroscopy are reported for poly (ε‐caprolactone)/maghnite nanocomposite formation, with ε‐caprolactone in situ polymerized in the presence of maghnite, a proton exchanged montmorillonite clay. Exfoliated and intercalated materials with different maghnite loading in the range 3–15 wt % were investigated. ¹H NMR evidences Brønsted acid hydroxyl groups in the silicate layers and shows that their broad signal at 7.6 ppm present in the parent clay disappears in the nanocomposite material. ²⁷Al MAS NMR results show that beside the hexacoordinated aluminum signal, two additional peaks corresponding to two different tetrahedral Al sites are present in the clay framework. The NMR signal intensity of only one of them was found to be affected in the nanocomposites compared with the parent maghnite, suggesting that these specific aluminum sites are the reactive ones at the initial stages of the polymerization. However almost no changes occurred in the ²⁹Si NMR spectra, confirming that the polymer grafting, as indicated earlier by atomic force microscopy, took place on the aluminum tetracoordinated sites rather than on the silicon sites. A mechanism of maghnite surface catalyzed polymerization of ε‐caprolactone was proposed, involving Brønsted and Lewis acid sites. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3060–3068, 2007     

Défaut d'exactitude des modéles¶de Néron toriques sur un corps local

Let R be a complete discrete valuation ring with mixed characteristic. Denote by K its field of fractions and by k its residue field. Let 0 →A ^K →B ^K →C ^K → 0 be an exact sequence of abelian varieties over K and consider the corresponding complex of Nérons models 0 →A→B→C→ 0, over R. We assume that the identity component B _k ⁰ of the special fibre B _k of B is a torus and we study the defect of exactmess at B in this last sequence.

---

Re?u: 4 décembre 1997/ Version revisée: 15 décembre 1997     

Short-range order and F ion diffusion inside the Pb1 − xAlxF2 + x solid solution Part II: Al NMR investigation and proposal of clustering process

A ²⁷Al nuclear magnetic resonance (NMR) investigation at room temperature of the Pb_{1 − x}Al_xF_{2 + x} (0 ≤ x ≤ 0.12) solid solution and of the ordered Pb₉Al₂F₂₄ phase is carried out. Two different types of aluminium ions are identified and their ratio is determined as a function of x. A clustering process based on the formation of column clusters, more and more extended when x increases, is proposed on the basis of results issued from the ¹⁹F (Part I) and ²⁷Al NMR investigations.     

Synthesis and antibacterial activities of water‐soluble methacrylate polymers containing quaternary ammonium compounds

New water‐soluble methacrylate polymers with pendant quaternary ammonium (QA) groups were synthesized and used as antibacterial materials. The polymers with pendant QA groups were obtained by the reaction of the alkyl halide groups of a previously synthesized functional methacrylate homopolymer with various tertiary alkyl amines containing 12‐, 14‐, or 16‐carbon alkyl chains. The structures of the functional polymer and the polymers with QA groups were confirmed with Fourier transform infrared and ¹H and ¹³C NMR. The degree of conversion of alkyl halides to QA sites in each polymer was determined by ¹H NMR to be over 90% in all cases. The number‐average molecular weight and polydispersity of the functional polymer were determined by size exclusion chromatography to be 32,500 g/mol and 2.25, respectively. All polymers were thermally stable up to 180 °C according to thermogravimetric analysis. The antibacterial activities of the polymers with pendant QA groups against Staphylococcus aureus and Escherichia coli were determined with broth‐dilution and spread‐plate methods. All the polymers showed excellent antibacterial activities in the range of 32–256 μg/mL. The antibacterial activity against S. aureus increased with an increase in the alkyl chain length for the ammonium groups, whereas the antibacterial activity against E. coli decreased with increasing alkyl chain length. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5965–5973, 2006     

SIMPLE TECHNIQUES FOR DETERMINING THE SMALL-SIGNAL EQUIVALENT CIRCUIT OF MESFET’s

Simple techniques for determining the broadband small signal equivalent circuit (SSEC) of MESFETs are presented in this paper. The intrinsic elements are calculated using two-dimensional method from the Y parameters, which are obtained from the Fourier analysis of the device transient response to voltage-step perturbations at the drain and gate electrodes. Whereas, the parasitic external elements are determined by simple approximations used in transmission line modeling. In addition, a new technique is also proposed to determine the source and drain series resistances. A comparison of the SSEC of three different MESFETs technologies shows that the MESFETs on GaN and 4H-SiC are suitable for high power applications. The method used to determine the intrinsic elements is validated with simulated data obtained by Monte Carlo method.     

Syntheses,structure, and photoluminescence properties of the 1-dimensional chain compounds [(TPA)(2)Au][Au(CN)(2)] and (TPA)AuCl (TPA = 1,3,5-triaza-7-phosphaadamantane)

The structures and temperature-dependent photoluminescence properties of the one-dimensional compounds [(TPA)(2)Au][Au(CN)(2)], 1, and (TPA)AuCl, 2, are reported. An extended linear chain with weak Au.Au interactions along the c-axis is evident in the structure of 1, and a helical chain with a pitch of 3.271 A is seen for 2. The intrachain Au...Au separation is 3.457(1) and 3.396(2) A in 1 and 2, respectively. As a result of this weak Au...Au interaction, the physical properties of these compounds are anisotropic. Scanning electron microscopy (SEM) studies indicate that single crystals of both compounds are noninsulating. Single crystals of 1 do not luminesce visibly, but grinding the crystals finely initiates a strong green emission under UV irradiation at room temperature. Further interesting optical properties include the dependence of the emission profile of the powder on the exciting wavelength and luminescence thermochromism. When excited at wavelengths < 360 nm, the powder exhibits a blue emission at 425 nm while excitation with longer wavelengths leads to a green emission near 500 nm. While the green emission dominates at ambient temperature, cooling to cryogenic temperatures leads to the dominance of the blue emission. Fibers of 2 are luminescent at 78 K with an emission band centered at 580 nm. Compound 1 crystallizes in the orthorhombic space group Cccm (No. 66), with Z = 2, a = 6.011(1) A, b = 23.877(6) A, c = 6.914(1) A, V = 992.3(3) A(3), and R = 0.0337. Compound 2 crystallizes in the trigonal space group R3 (No. 148), with Z = 18, a = 22.587(2) A, b = 22.587(2) A, c = 9.814(2) A, V = 4336 A(3), and R = 0.0283.     

Synthetic strategies and functional reactivity of versatile thiophene synthons

Abstract

Thiophenes are a highly important group of heterocycles and have been of great interest to researchers due to their various reactivities. Many synthetic strategies are used to generate functionalized thiophene derivatives. Several reactions are described, depending on the reactivity of the substituents attached to the thiophene nucleus toward different nucleophiles to yield the versatile thiophene products. Many diverse applications have been utilized for thiophenes from medicinal chemistry to material science.     

Negative ion mass spectra of some unsaturated C-glycosides following keV ion bombardment

A series of anomeric unsaturated C-glycosides were studied by negative ion mass spectrometry following keV ion bombardment The compounds bearing an acidic hydrogen show a prominent [M ? H]^? peak; in the other cases, the [M ? H]^? peak is of very low intensity. A retro-Diels–Alder fragmentation and the abstraction of a hydrogen atom from the aglycon residue are observed in all cases.     

Selective Solid Phase Extraction and Pre-Concentration of Heavy Metals from Seawater by Physically and Chemically Immobilized 4-Amino-3-Hydroxy-2-(2-Chlorobenzene)-Azo-1-Naphthalene Sulfonic Acid Silica Gel

4-Amino-3-hydroxy-2-(2-chlorobenzene)-azo-1-naphthalene sulfonic acid (AHCANSA) was used as a chelating modifier to improve the reactivity of the silica gel surface in terms of selective binding and extraction of heavy metal ions. The surface coverage values were found to be 0.488 and 0.473mmolg^–1 for the newly modified physically adsorbed silica gel phase (I) and chemically immobilized-AHCANSA phase (II), respectively. The modified silica gel phases (I, II) were tested for stability in different acidic buffer solutions (pH 1–6) and found to be highly resistant to hydrolysis and leaching by buffer solutions above pH 2. The application of these two phases as solid extractors for a series of mono-, di-, and tri-valent metal ions from aqueous solutions was also performed with different controlling factors such as the pH value of metal ion solutions and equilibrium shaking time. The mmolg^–1 metal capacity values determined by silica gel phases (I, II) were found to confirm high affinity and selectivity characters for binding with heavy metal ions such as Cr³⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Pb²⁺ in a range of 0.250–0.483. The tested alkali and alkaline earth metals, Na⁺, K⁺, Mg²⁺ and Ca²⁺, were found to exhibit little interaction and binding ability with the modified silica gel phases. The selectivity characters incorporated into the modified silica gel phases were further utilized and applied in solid phase extraction and pre-concentration of trace concentration levels (1.0µgmL^–1 and 2.00–2.50ngmL^–1) from real seawater samples. The percentage recovery values determined for Cr³⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Pb²⁺ were found to be in the range of 95.2–98.1±2.0–5.0%, and the pre-concentration recovery values for the same tested heavy metal ions were found to be in the range of 92.5–97.1±3.0–6.0% for the two newly modified silica gel phases with a pre-concentration factor of 500.Received December 20, 2002; accepted May 14, 2003 published online September 1, 2003